摘要高频主题词
本刊高频关键词
1、投稿方式：在线投稿。
2、刊内网址：
http://www.sciencedirect.com/journal/horticultural-plant-journal
投稿系统：
https://www.editorialmanager.com/hortpj/default.aspx
3、期刊相关网址：
http://www.keaipublishing.com/en/journals/horticultural-plant-journal/
4、刊内邮箱：hortjournal@163.com
5、刊内电话：010-62124615
6、出刊日期：双月刊，逢单月出版。
2021年5月17日星期一
《园艺学报（英文版）》投稿指南
【2020年01期信息】
GUIDE FOR AUTHORS
Introduction
Types of paper
Contributions
falling into the following categories will be considered for
publication: Original research papers, reviews, Research Notes, Short
Communication, New technologies, News and Views, Commentary on
significant events and topics in global horticultural fields with
international interests.
Please
ensure that you select the appropriate article type from the list of
options when making your submission. Authors contributing to special
issues should ensure that they select the special issue article type
from this list.
Before You Begin
Ethics in Publishing
Ethics
in Publishing For information on Ethics in Publishing and Ethical
guidelines for journal publication see http://www.elsevier.com/
publishingethics and http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All
authors are requested to disclose any actual or potential conflict of
interest including any financial, personal or other relationships with
other people or organizations within three years of beginning the
submitted work that could inappropriately influence, or be perceived to
influence, their work. See also
http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission
of an article implies that the work described has not been published
previously (except in the form of an abstract or as part of a published
lecture or academic thesis), that it is not under consideration for
publication elsewhere, that its publication is approved by all authors
and tacitly or explicitly by the responsible authorities where the work
was carried out, and that, if accepted, it will not be published
elsewhere including electronically in the same form, in English or in
any other language, without the written consent of the copyright-holder.
Changes to authorship
This policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts:
Before
the accepted manuscript is published in an online issue: Requests to
add or remove an author, or to rearrange the author names, must be sent
to the Journal Manager from the corresponding author of the accepted
manuscript and must include: (a) the reason the name should be added or
removed, or the author names rearranged and (b) written confirmation
(e-mail, fax, letter) from all authors that they agree with the
addition, removal or rearrangement. In the case of addition or removal
of authors, this includes confirmation from the author being added or
removed. Requests that are not sent by the corresponding author will be
forwarded by the Journal Manager to the corresponding author, who must
follow the procedure as described above. Note that: (1) Journal Managers
will inform the Journal Editors of any such requests and (2)
publication of the accepted manuscript in an online issue is suspended
until authorship has been agreed. After the accepted manuscript is
published in an online issue: Any requests to add, delete, or rearrange
author names in an article published in an online issue will follow the
same policies as noted above and result in a corrigendum.
Copyright
Upon acceptance of an article, authors will be asked to complete a ‘Journal
Publishing Agreement’ (for more information on this and copyright, see
http://www.elsevier.com/copyright). An e-mail will be sent to the
corresponding author confirming receipt of the manuscript together with a
‘Journal Publishing Agreement’ form or a link to the online version of this agreement.
Author rights
As
an author you (or your employer or institution) have certain rights to
reuse your work. For more information on author rights please see
http://www.elsevier.com/copyright.
Role of the funding source
You
are requested to identify who provided financial support for the
conduct of the research and/or preparation of the article and to briefly
describe the role of the sponsor(s), if any, in study design; in the
collection, analysis and interpretation of data; in the writing of the
report; and in the decision to submit the paper for publication. If the
funding source(s) had no such involvement then this should be stated.
Please see http://www.elsevier.com/funding
Funding body agreements and policies
Elsevier
has established a number of agreements with funding bodies which allow
authors to comply with their funder’s open access policies. Some authors
may also be reimbursed for associated publication fees. To learn more
about existing agreements please visit http://www.elsevier.com/
fundingbodies.After acceptance, open access papers will be published
under a noncommercial license. For authors requiring a commercial CC BY
license, you can apply after your manuscript is accepted for
publication.
Open access
Every
peer-reviewed research article appearing in this journal will be
published open access. This means that the article is universally and
freely accessible via the internet in perpetuity, in an easily readable
format immediately after publication. The author does not have any
publication charges for open access, the Chinese Society for
Horticultural Science, the Institution of Vegetable and Flowers (IVF),
the Chinese Academy of Agriculture Science (CAAS) will pay to make the
article open access.
A CC user license manages the reuse of the article (see http://www.elsevier.com/openaccesslicenses).
All articles will be published under the following license: Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND)
For
non-commercial purposes, lets others distribute and copy the article,
and to include in a collective work (such as an anthology), as long as
they credit the author(s) and provided they do not alter or modify the
article.
Language and language services
write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about
language editing and copyediting services pre- and post-submission
please visit http://webshop.elsevier.com/languageediting or our customer
support site at http://support.elsevier.com for more information.
to this journal proceeds totally online. Use the following guidelines
to prepare your article. Via the homepage of this journal
(http://ees.elsevier.com/XXXXX) you will be guided stepwise through the
creation and uploading of the various files. The system automatically
converts source files to a single Adobe Acrobat PDF version of the
article, which is used in the peer-review process. Please note that even
though manuscript source files are converted to PDF at submission for
the review process, these source files are needed for further processing
after acceptance. All correspondence, including notification of the
Editor’s decision and requests for revision, takes place by e-mail and
via the author’s homepage, removing the need for a hard-copy paper
trail. If you are unable to provide an electronic version, please
contact the editorial office prior to submission: hortjournal@caas.cn;
telephone: 86-10-82109523; or fax: 86-10-62192388.
Referees
submit the names and institutional e-mail addresses of several
potential referees. For more details, visit our Support site. Note that
the editor retains the sole right to decide whether or not the suggested
reviewers are used.
Additional Information
Tables
and figures may be presented with captions within the main body of the
manuscript; if so, figures should additionally be uploaded as high
resolution files.
Preparation
Use of word processing software
It
is important that the file be saved in the native format of the word
processor used. The text should be in single-column format. Keep the
layout of the text as simple as possible. Most formatting codes will be
removed and replaced on processing the article. In particular, do not
use the word processor’s options to justify text or to hyphenate words.
However, do use bold face, italics, subscripts, superscripts etc. When
preparing tables, if you are using a table grid, use only one grid for
each individual table and not a grid for each row. If no grid is used,
use tabs, not spaces, to align columns.
The
electronic text should be prepared in a way very similar to that of
conventional manuscripts (see also the Guide to Publishing with
Elsevier: (http://www.elsevier.com/guidepublication). Note that source
files of figures, tables and text graphics will be required whether or
not you embed your figures in the text. See also the section on
Electronic illustrations. To avoid unnecessary errors you are strongly
advised to use the “spellcheck” and “grammar-check” functions of your word processor.
Article structure
Manuscripts in general should be organized in the following order:
• Title
• Name(s) of author(s)
•
Affiliations (The institutions at which the work was carried out and
their postal addresses), including email addresses, phone and fax
numbers for the corresponding author(s)
• Abstract (200–300 words) followed by 4–8 keywords
• Introduction (no need for giving the heading)
• Materials and Methods
• Results
• Discussion
• Conclusions (optional)
• Acknowledgments
• References
• Figures and their captions
• Tables
Please let all the above parts involved in one Word file.
Subdivision - numbered sections
Divide
your article into clearly defined and numbered sections. Subsections
should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract
is not included in section numbering). Use this numbering also for
internal crossreferencing: do not just refer to “the text”. Any
subsection may be given a brief heading. Each heading should appear on
its own separate line.
State
the objectives of the work and provide an adequate background, avoiding
a detailed literature survey or a summary of the results.
Material and methods
Provide
sufficient detail to allow the work to be reproduced. Methods already
published should be indicated by a reference: only relevant
modifications should be described.
Results
Results should be clear and concise.
Discussion
This
should explore the significance of the results of the work, not repeat
them. A combined Results and Discussion section is often appropriate.
Avoid extensive citations and discussion of published literature.
Conclusions
main conclusions of the study may be presented in a short Conclusions
section, which may stand alone or form a subsection of a Discussion or
Results and Discussion section.
Appendices
If
there is more than one appendix, they should be identified as A, B,
etc. Formulae and equations in appendices should be given separate
numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq.
(B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1,
etc.
Essential title page information
Concise
and informative. Titles are often used in information-retrieval
systems. Avoid abbreviations and formulae where possible.
• Author names and affiliations
Where
the family name may be ambiguous (e.g., a double name), please indicate
this clearly. Present the authors’ affiliation addresses (where the
actual work was done) below the names. Indicate all affiliations with a
lower-case superscript letter immediately after the author’s name and in
front of the appropriate address. Provide the full postal address of
each affiliation, including the country name, and, if available, the
e-mail address of each author.
• Corresponding author
Clearly
indicate who will handle correspondence at all stages of refereeing and
publication, also post-publication. Ensure that telephone and fax
numbers (with country and area code) are provided in addition to the
e-mail address and the complete postal address. Contact details must be
kept up to date by the corresponding author.
• Present/permanent address
an author has moved since the work described in the article was done,
or was visiting at the time, a “Present address” (or “Permanent
address”) may be indicated as a footnote to that author’s name. The
address at which the author actually did the work must be retained as
the main, affiliation address. Superscript Arabic numerals are used for
such footnotes
Abstract
A
concise and factual abstract is required. The abstract should state
briefly the purpose of the research, the principal results and major
conclusions. An abstract is often presented separately from the article,
so it must be able to stand alone. For this reason, References should
be avoided, but if essential, then cite the author(s) and year(s). Also,
non-standard or uncommon abbreviations should be avoided, but if
essential they must be defined at their first mention in the abstract
itself.
Keywords
Authors are invited to submit keywords associated with their paper.
Acknowledgements
Collate
acknowledgements in a separate section at the end of the article before
the references and do not, therefore, include them on the title page,
as a footnote to the title or otherwise. List here those individuals who
provided help during the research (e.g., providing language help,
writing assistance or proof reading the article, etc.).
Nomenclature and units
Follow
internationally accepted rules and conventions: use the international
system of units (SI). If other quantities are mentioned, give their
equivalent in SI. You are urged to consult IUPAC: Nomenclature of
Organic Chemistry: http://www.iupac.org/ for further information.
Math formulae
Present
simple formulae in the line of normal text where possible and use the
solidus (/) instead of a horizontal line for small fractional terms,
e.g., X/Y. In principle, variables are to be presented in italics.
Powers of e are often more conveniently denoted by exp. Number
consecutively any equations that have to be displayed separately from
the text (if referred to explicitly in the text).
Footnotes
should be used sparingly. Number them consecutively throughout the
article, using superscript Arabic numbers. Many word processors build
footnotes into the text. Otherwise, please indicate the position of
footnotes in the text and list the footnotes themselves separately at
the end of the article.
Do not include footnotes in the Reference list.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as “graphics” or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless
of the application used, when your electronic artwork is finalised,
please “save as” or convert the images to one of the following formats
(note the resolution requirements for line drawings, halftones, and
line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text as “graphics”.
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a
minimum of 500 dpi is required.
If your electronic artwork is created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply “as is”.
Please do not:
• Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
make sure that artwork files are in an acceptable format (TIFF, EPS or
MS Office files) and with the correct resolution. If, together with your
accepted article, you submit usable color figures then Elsevier will
ensure, at no additional charge, that these figures will appear in color
on the Web (e.g., ScienceDirect and other sites) regardless of whether
or not these illustrations are reproduced in color in the printed
version.
color reproduction in print, you will receive information regarding the
costs from Elsevier after receipt of your accepted article. Please
indicate your preference for color: in print or online only. For further
information on the preparation of electronic artwork, please see
http://www.elsevier.com/artworkinstructions. Please note: Because of
technical complications that can arise by converting color figures to
‘gray scale’ (for the printed version should you not opt for color in
print) please submit in addition usable black and white versions of all
the color illustrations.
Figure captions
Ensure
that each illustration has a caption. Supply captions separately, not
attached to the figure. A caption should comprise a brief title (not on
the figure itself) and a description of the illustration. Keep text in
the illustrations themselves to a minimum but explain all symbols and
abbreviations used.
submit tables as editable text and not as images. Tables can be placed
either next to the relevant text in the article, or on separate page(s)
at the end. Number tables consecutively in accordance with their
appearance in the text and place any table notes below the table body.
Be sparing in the use of tables and ensure that the data presented in
them do not duplicate results described elsewhere in the article. Please
avoid using vertical rules.
References
Citation in text
ensure that every reference cited in the text is also present in the
reference list (and vice versa). Any references cited in the abstract
must be given in full. Unpublished results and personal communications
are not recommended in the reference list, but may be mentioned in the
text. If these references are included in the reference list they should
follow the standard reference style of the journal and should include a
substitution of the publication date with either “Unpublished results”
or “Personal communication” Citation of a reference as “in press”
implies that the item has been accepted for publication.
Web references
a minimum, the full URL should be given and the date when the reference
was last accessed. Any further information, if known (DOI, author
names, dates, reference to a source publication, etc.), should also be
given. Web references can be listed separately (e.g., after the
reference list) under a different heading if desired, or can be included
in the reference list.
References in a special issue
ensure that the words ‘this issue’ are added to any references in the
list (and any citations in the text) to other articles in the same
Special Issue.
Reference management software
Most
Elsevier journals have a standard template available in key reference
management packages. This covers packages using the Citation Style
Language, such as Mendeley
(http://www.mendeley.com/features/referencemanager) and also others like
EndNote (http://www.endnote.com/support/ enstyles.asp) and Reference
Manager (http://refman.com/support/rmstyles.asp). Using plug-ins to word
processing packages which are available from the above sites, authors
only need to select the appropriate journal template when preparing
their article and the list of references and citations to these will be
formatted according to the journal style as described in this Guide. The
process of including templates in these packages is constantly ongoing.
If the journal you are looking for does not have a template available
yet, please see the list of sample references and citations provided in
this Guide to help you.
you manage your research with Mendeley Desktop, you can easily install
the reference style for this journal by clicking the link below:
http://open.mendeley.com/use-citation-style/the-crop-journal
When
preparing your manuscript, you will then be able to select this style
using the Mendeley plugins for Microsoft Word or LibreOffice. For more
information about the Citation Style Language, visit
http://citationstyles. org.
Reference style
Text: All citations in the text should refer to:
1. Single author: the author’s name (without initials, unless there is ambiguity) and the year of publication;
2. Two authors: both authors’ names and the year of publication;
3. Three or more authors: first author’s name followed by “et al.” and the year of publication.
Citations
may be made directly (or parenthetically). Groups of references should
be listed first alphabetically, then chronologically.
Examples: “as demonstrated (Allan, 1996a, 1996b, 1999; Allan and Jones, 1995). Kramer et al. (2000) have recently shown ....”
List:
References should be arranged first alphabetically and then further
sorted chronologically if necessary. More than one reference from the
same author(s) in the same year must be identified by the letters “a”,
“b”, “c”, etc., placed after the year of publication.
Examples:
Reference to a journal publication:
Van der Geer, J., Hanraads, J.A.J., Lupton, R.A., 2000. The art of writing a scientific article. J. Sci. Commun. 163, 51–59.
Reference to a book:
Strunk Jr., W., White, E.B., 1979. The Elements of Style, third ed. Macmillan, New York.
Reference to a chapter in an edited book:
Mettam,
G.R., Adams, L.B., 1999. How to prepare an electronic version of your
article, in: Jones, B.S., Smith, R.Z. (Eds.), Introduction to the
Electronic Age. E-Publishing Inc., New York, pp. 281–304.
Journal abbreviations source
Journal
names should be abbreviated according to Index Medicus journal
abbreviations: http://www.nlm.nih.gov/tsd/serials/lji.html; List of
title word abbreviations: http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service): http://www.cas.org/sent.html.
Submission checklist
following list will be useful during the final checking of an article
prior to sending it to the journal for review. Please consult this Guide
for Authors for further details of any item.
Ensure that the following items are present:
One Author designated as corresponding Author:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded
• Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been “spellchecked” and “grammar-checked”
• References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
Printed version of figures (if applicable) in color or black-and-white
• Indicate clearly whether or not color or black-and-white in print is required.
• For reproduction in black-and-white, please supply black-and-white versions of the figures for printing purposes.
For any further information please visit our customer support site at http://support.elsevier.com.
After Acceptance
Use of the Digital Object Identifier
Digital Object Identifier (DOI) may be used to cite and link to
electronic documents. The DOI consists of a unique alpha-numeric
character string which is assigned to a document by the publisher upon
the initial electronic publication. The assigned DOI never changes.
Therefore, it is an ideal medium for citing a document, particularly
‘Articles in press’ because they have not yet received their full
bibliographic information. The correct format for citing a DOI is shown
as follows (example taken from a document in the journal Physics Letters
B):
doi:10.1016/j.physletb.2010.09.059
When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed never to change.
Proofs
One
set of page proofs (as PDF files) will be sent by e-mail to the
corresponding author (if we do not have an e-mail address then paper
proofs will be sent by post) or, a link will be provided in the e-mail
so that authors can download the files themselves. Elsevier now provides
authors with PDF proofs which can be annotated; for this you will need
to download Adobe Reader version 9 (or higher) available free from
http://get.adobe.com/ reader.
Instructions
on how to annotate PDF files will accompany the proofs (also given
online). The exact system requirements are given at the Adobe site:
http://www.adobe.com/products/reader/systemreqs.
you do not wish to use the PDF annotations function, you may list the
corrections (including replies to the Query Form) and return them to
Elsevier in an e-mail. Please list your corrections quoting line number.
If, for any reason, this is not possible, then mark the corrections and
any other comments (including replies to the Query Form) on a printout
of your proof and return by fax, or scan the pages and e-mail, or by
post. Please use this proof only for checking the typesetting, editing,
completeness and correctness of the text, tables and figures.
Significant changes to the article as accepted for publication will only
be considered at this stage with permission from the Editor. We will do
everything possible to get your article published quickly and
accurately. It is important to ensure that all corrections are sent back
to us in one communication: please check carefully before replying, as
inclusion of any subsequent corrections cannot be guaranteed.
Proofreading is solely your responsibility. Note that Elsevier may
proceed with the publication of your article if no response is received.
Offprints
corresponding author, at no cost, will be provided with a PDF file of
the article via e-mail. For an extra charge, paper offprints can be
ordered via the offprint order form which is sent once the article is
accepted for publication.
PDF file is a watermarked version of the published article and includes
a cover sheet with the journal cover image and a disclaimer outlining
the terms and conditions of use.
More information about article offprint is available here: http://webshop.elsevier.com/
Author Inquiries
inquiries relating to the submission of articl es (including electronic
submission) please visit this journal’s homepage. Contact details for
questions arising after acceptance of an article, especially those
relating to proofs, will be provided by the publisher. You can track
accepted articles at http://www.elsevier.com/trackarticle. You can also
check our Author FAQs (http://www.elsevier.com/authorFAQ) and/or contact
Customer Support via http://support.elsevier.com
